5
MA691100_14.1
[Original Instructions]
4/08/2013
Operation
The MiniMet 1000 Grinder-Polisher can be used to prepare a wide range of specimen materials by fine
grinding, rough polishing, and by final polishing.
Control Panel
To power on the MiniMet 1000, move the power switch on the back of the machine to the ON
position and press the Power button on the control panel.
Figure 1
MiniMet 1000 Grinder-Polisher Control Panel
Buttons
POWER
............ Activates or deactivates power to the MiniMet 1000.
When ON, the panel LCDs will light up.
INCREASE / DECREASE
Use the INCREASE or DECREASE buttons to select a range
of values for the different parameters.
RUN / STOP
..... Press the RUN / STOP button to activate a grinding-polishing cycle or to
stop a grinding-polishing cycle
