6
MA691100_14.1
[Original Instructions]
4/08/2013
SELECT
........... Press the SELECT button to scroll through and select a parameter:
TIME, SPEED, FORCE, and SOFT STOP.
TIME
............... Press the INCREASE or DECREASE buttons to set a TIME
value from 30 seconds to 9 minutes, in 10 second increments.
TIME can also be set for continuous operation. ON will be
displayed in the LCD indicating continuous operation.
SPEED
............. Press the INCREASE or DECREASE buttons to select a speed
from 10 to 50 rpms, in 5 rpm increments.
FORCE
............. Press the INCREASE or DECREASE buttons to select a force
(pounds or newtons) from 0 to 10 pounds, in
1 pound increments or 0 to 50 newtons, in 5 newton increments.
When the MiniMet 1000 is first activated, the FORCE will be set
to 0 (zero). Once a force value is entered, it will become the
default force value until the power switch is flipped to the OFF
position or the unit is unplugged.
SOFT
STOP
..... Press the INCREASE or DECREASE buttons to select ON or
OFF for SOFT STOP. ON or OFF will be displayed in the LCD.
When set to ON, SOFT STOP will automatically reduce the
FORCE to 50% of the initial FORCE value for the last 10% of the
total elapsed time.
The FORCE is further reduced to 10% of the initial FORCE value
for the last 5% of the total elapsed time and will remain at the
reduced FORCE value until the RUN CYCLE is completed.
