Buderus 8732929427, Инструкция по установке и обслуживанию для специалистов

Страница: 46 / 68

10
Data Protection Notice
Logalux – 6721814238 (2020/03) 46
NOTICE:
Corrosion damage!
If the anode is neglected, this could lead to premature corrosion.
▶ Inspect the anode every one or two years, depending on the on-site
water quality, replace if required.
Never bring the magnesium anode surface into contact with oil or grease.
▶ Keep everything clean.
▶ Shut off the cold water inlet.
▶ Depressurise the cylinder (

Fig. 19, page 61).
▶ Remove and test the magnesium anode (

Fig. 28 to Fig. 31,
page 63).
▶ Replace the magnesium anode if its diameter has been reduced to
less than 15 mm.
▶ If the magnesium anode is insulated: check the transfer resistance
between the protective conductor connection and the magnesium
anode. If the anode current is <0.3 mA, replace the magnesium
anode (

Fig. 27, page 63).
9.4.4 Recommissioning
▶ Flush the cylinder thoroughly after cleaning or repair.
▶ Vent on the heating side and on the domestic water side.
9.5 Function check
NOTICE:
Damage through positive pressure.
A pressure-relief valve malfunction can result in damage due to positive
pressure.
▶ Check the pressure-relief valve function and flush through several
times by venting.
▶ Never close the blow-off opening of the pressure-relief valve.
9.6 Checklist for maintenance
▶ Fill out the report and note the tasks performed.
Table 54 Checklist for inspection and maintenance
10 Data Protection Notice
We, Bosch Thermotechnology Ltd., Cotswold Way,
Warndon, Worcester WR4 9SW, United Kingdom
process product and installation information,
technical and connection data, communication data,
product registration and client history data to provide
product functionality (art. 6 (1) sentence 1 (b)
GDPR), to fulfil our duty of product surveillance and for product safety
and security reasons (art. 6 (1) sentence 1 (f) GDPR), to safeguard our
rights in connection with warranty and product registration questions
(art. 6 (1) sentence 1 (f) GDPR) and to analyze the distribution of our
products and to provide individualized information and offers related to
the product (art. 6 (1) sentence 1 (f) GDPR). To provide services such as
sales and marketing services, contract management, payment handling,
programming, data hosting and hotline services we can commission and
transfer data to external service providers and/or Bosch affiliated
enterprises. In some cases, but only if appropriate data protection is
ensured, personal data might be transferred to recipients located
outside of the European Economic Area. Further information are
provided on request. You can contact our Data Protection Officer under:
Data Protection Officer, Information Security and Privacy (C/ISP),
Robert Bosch GmbH, Postfach 30 02 20, 70442 Stuttgart, GERMANY.
You have the right to object, on grounds relating to your particular
situation or where personal data are processed for direct marketing
purposes, at any time to processing of your personal data which is based
on art. 6 (1) sentence 1 (f) GDPR. To exercise your rights, please contact
us via
privacy.ttgb@bosch.com To find further information, please
follow the QR-Code.
Date
1 Check the function of
the pressure-relief
valve
2 Check tightness of
connections
3 Descale/clean
the inside of the
cylinder
4 Signature
Stamp