Bucktool SSA16LVF, Инструкция по эксплуатации

Страница: 6 / 24

6
SAFETY GUIDELINES
SSA16LVF
• Use the right tool. Do not force small tools to do the job of a heavy-duty tool.
Do not use tools for purposes not intended; for example do not use circular
saws to cut tree limbs or logs.
• Dress properly. Do not wear loose clothing or jewelry that can be caught in
moving parts. On-skid footwear is recommended when working outdoors.Wear
protective hair covering to contain long hair.
• Use protective equipment. Use safety glasses. Use face or dust mask if cutting
operations create dust.
• Connect dust extraction equipment. If devices are provided for the connection
of dust extraction and collecting equipment, ensure these are connected and
properly used.
• Do not abuse the power cord. Never pull the power cord to disconnect it from
the socket. Keep the lead away from heat, oil and sharp edge.
• Secure work. Where possible use clamps or a vice to hold the work. It’s safer
than using your hand.
• Don’t over reach. Keep proper footing and balance at all time.
• Maintain tools with care. Keep cutting tools sharp and clean for better and safer
performance. Follow instructions for lubricating and changing accessories.
Inspect power cables periodically and if damaged have they replaced by an
authorized service facility. Inspect extension cables periodically and replace if
damaged.Keep handles dry-clean and free from oil and grease.
• Disconnect tools. When not in use, before servicing and when changing acce-
ssories such as blades, bits,cutters, Disconnect tools from the power supply.
• Remove adjusting keys and wrenches. Form the habit of checking to see that
keys and adjusting wrenches are removed from the tool before turning it on.
• Avoid unintentional starting. Ensure switch is in‘off’position when plugging in.
• Use outdoor extension leads. When the tool is used outdoors, use only exte-
nsion leads intended for outdoor use and so marked.
• Stay alert. Watch what you are doing, use common sense and do not operate
the tool when you are tired.
• Check damaged parts. Before further use of the tools, it should be carefully
checked to determine that it will operate properly and perform its intended
function. Check the alignment of moving parts, binding of moving parts, brea-
kage of parts, mounting and any other conditions that may affect its operation.
A guard or other part that is damaged should be properly repaired or replaced
by an authorized service center unless otherwise indicated in this instruction
manual. Do not use the tool if the switch does not turn on and off.
• Warning. Repaired by a qualified person. This electric tool compliers with the