Examples of Improper Attachment
Fig.3 Fig.4 Fig.5 Fig.6
Examples of Improper Attachment (Ref. Fig. 3
–
6):
Do not connect:
Locking Snaphook to anchor point other than work positioning D-ring.
Positioning Device back onto itself and use as a cinch or choking device.
Carabiners and Locking Snaphook with the gates facing in.
OPERATION:
1.
To mount the Positioning Device to the body belt, connect the Carabiner / Locking Snaphook to one of the Body Belt
Work Positioning D-rings, then pass the strap around the back side of the pole and connect the remaining Carabiner /
Locking Snaphook to the opposite Work Positioning D-ring. See Fig. 1 and 2 above.
2.
To lengthen the strap, (to go out to the end of a cross arm or to put the user further away from the pole) place one hand
behind the pole and lean slightly toward the pole taking tension off the strap to relax tension on the cam lever. Gradually
depress the cam lever towards the pole while slowly leaning back, until you have adjusted to your desired length. (Fig.7)
3.
To shorten the strap, place one hand behind the pole and lean slightly towards the pole while pulling the free end of the
strap through the cam lever, until you have adjusted to your desired length. (Fig.8)
To Lengthen To Shorten
To Lengthen To Shorten
48129W2Y.Doc
PN 230280 (Rev. 4/27/16) 3 of 4
Fig. 7
Fig. 8
