Buchi B-585, Руководство по эксплуатации

Страница: 32 / 36

30
Glass Oven B-585
9.2 Error messages
Error message Possible cause Remedy
Main switch dors not Device is turned off, power supply Switch on the device, check power supply
light up voltages is missing or fuse defective voltage and fuses
No temperature Display or print defective Check power supply voltage/fuses and replace them,
indication send device to service center
Oven does not heat Nopower supply voltage or fuses Check heating leed,
defective
Motor does not turn
Device is turned off, no mains voltage Switch on the instrument,
or fuses devective, motor set is on checkt the controll cable,
0 r/min, controll cable is not pluged please contact the service department
in properly,
E1 Internal temperature sensor defective Please contact service department
E2 Internal temperature sensor defective Please contact service department
E3 Internal temperature sensor defective Please contact service department
E9 Heating cefective Please contact service department
E10-11 Heating cefective Please contact service department
9 Appendix
9 Appendix
9.1 Technical data
Supply voltage
100 - 230 VAC +/-10 %
Frequency
50/60 Hz
Power
max. 450 W
Pin assignment
Pin 1: Ground (Gnd)
Pin 2: + 24 V DC
Pin 3 to 8: not assigned
Warm-up time
ca. 10 min. (from 20°C to 300°C)
Temperature regulation range
40-300°C
Temperature accuracy
+/- 5°C (in the middle of the oven at 300°C)
Drying
Drying volume max. 100-250 ml
Dimensions 410 x 300 x 300 (width x depth x heigth)
Weight 9.5 kg
Kugelrohr
Distillation volume max. 10-60ml
Rotational speed 0-50 rpm.
Dimensions 650 x 300 x 300 (width x depth x heigth)
Weight 11.5 kg
Ambient temperature
5-40°C
Installation category
II
Pollution degree
2
Environmental conditions
for indoor use only, altitude up to 2000 m.
maximum relativ humidity 80% for temperatures up to 30°C
decreasin linearly to 50% relative humidity at 40°C