5. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
6. Press “Function” ONCE. The indicator light for “Sterilise” will flash for 5 seconds, then the
unit will automatically sterilise the contents.
7. The whole process of sterilisation lasts for 15 minutes, with the LCD screen performing
the countdown. Once completed, the unit will remain in standby mode with the light off
and the LCD screen displaying “00”.
•
DO NOT OPEN THE LID OR TOUCH THE SURFACE IMMEDATELY AFTER FINISHING
STERILISATION.
8. If the sterilised bottles and accessories (teats, caps etc.) are not used within 24 hours,
please re-sterilise them again.
9. Please re-fill with 90ml of fresh water if you will be using the unit again. Do not reuse
water.
Cycle Sterilise
1.
Before placing the bottles and accessories (teats, caps etc.) into the steriliser, they must
all be washed and thorough rinsed in fresh water, then emptied.
2. Remove the Bottle Container from the Base unit, then place the bottles inside UPSIDE
DOWN. This is important so that the steam can enter the bottles easily.
3. Place the accessories into the Accessory Grid and cover with the lid. Fill the measuring
cup to the top of the marked line with 270ml of fresh water, then pour into the Base
Heating Element.
•
DO NOT EXCEED OR REDUCE THE VOLUME OF WATER
•
DO NOT PUT THE ACCESSORY GRID UPSIDE DOWN. DO NOT TAKE THE GRID OUT
OF THE CONTAINER.
4. Assemble the unit parts and place on the Base Heating Element.
5. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
6. Press “Function” TWICE. The indicator light for “Cycle” will flash for 5 seconds and the
LCD screen will display “6h”, which means that the default sterilisation time is set for 6
hours. Press the “Time” button ONCE and the screen will display “12h”, which means the
time has now been set for 12 hours. The unit will then automatically sterilise circularly.
The indicator light for “Cycle” will remain lit.
7. The unit will automatically run the sterilisation process every 6 or 12 hours (depending on
the time you have set), for a total of 4 times at the most. If you need to cancel this, press
the “Off” button.
8.
Upon finishing the whole cycle sterilisation process, the steriliser will be OFF and in
standby mode, with the light off and the LCD screen indicating “00”.
Cook
1.
According to different times required to cook different foods, different volumes of fresh
water should be filled by the measuring cup and poured into the Base Heating Element:
•
One cup of fresh water (90ml) for cooking times under 15 minutes.
•
Two cups (180ml) for cooking times between 15-30 minutes.
•
Three cups (270ml) for cooking times between 30-45 minutes.
•
Four cups (360ml) for cooking times longer than 45 minutes.
2. Place the food onto the cooking grid, then place the Accessory Grid and cover with the
lid. Pour the correct amount of water into the Base Heating Element.
•
DO NOT EXCEED OR REDUCE THE VOLUME OF WATER.
•
DO NOT PUT THE ACCESSORY GRID IN UPSIDE DOWN.
3. Assemble the unit parts and place them on the Base Heating Element.
4. Plug the unit in to the power socket. It will automatically be on and in standby mode,
with the LCD screen displaying “00”.
5. Press “Function” THREE times. The indicator light for “Cook” will blink for 5 seconds, then
the unit will start cooking. The initial cooking time will be 10 minutes, however this can be
2
