6.
Diffuser Plate
16.
Water Output Adjusted Valve
7.
Pump outlet (Locknut for 7/9 ELITE)
17.
Air Intake Tube
8.
Leading Box
19.
Vanturi
9.
Lower Diffuser Plate
19.
Gel mat (4)
10.
Water Pump
** Note: parts may come pre-assembled.
Installation:
1. Mount the pump to board.
a. The board has a slot for the power cord; position the pump accordingly.
b. Make sure the screws are secured.
c. Do not over tighten.
2. Mount the lower plate to the pump.
a. Tighten the locking nut.
3. Mount the upper plate and lead wall over the lower.
a. Tighten the long nylon screw.
4. Assemble the skimmer body with adjustment tube.
a. Connect the intake tube to the venturi.
5. Mount the skimmer body to the board.
a. Ensure the venturi hole lines up with the outlet of the water pump.
b. Fasten the screws.
6. Side the verturi through the skimmer body, connecting it to the water pump.
7. Mount the collection cup to the skimmer body
a. Make sure the outlet of the cup has an o-ring.
8. Connec
t the drain tube to the cup’s outlet.
9. After complete assembly, the unit is ready for use.
a. Submerge the unit with water.
b. Connect power cord to an electric socket (GFI certified outlet).
c. Make your adjustments using the adjustment tube.
Содержание Curve Elite Series
Страница 4: ...CURVE 5 7 9 ELITE Installation sketch map...
