BTT Melmak, Инструкция по эксплуатации, Страница: 16 / 28

4
Use Instructions
Depending on the size of the housing of the Transducer a
small or large Transducer holder will be supplied.
The following descriptions apply for both sizes.
4.1
Non-Cast Use Instructions
1. Before starting, Physician will mark an “X” over fracture
site, to ensure accurate placement of Transducer
holder for every treatment. You will need to ensure this
point is reproducible for each treatment. An indelible
marker may assist.
2. Place strap with Transducer holder over fracture site
and stabilise securely using the Hook and Loop fasten-
ers. It is vital that Transducer holder be held securely
over site to be treated, to ensure Transducer is ac-
curately positioned.
3. Open Transducer holder by pushing two turquoise tabs
on either side of Transducer holder towards centre.
4. Hold Transducer and place a small amount of ultra-
sound gel on the Transducer face, approximately
1.5cm diameter.
Place ultrasound Transducer through Transducer
holder.
Ensure cable is routed through cut out on cap and
secure by closing cap.
10