Sensor Configuration and Numbering
SMART MATRIX TWIST
- 2-11 -
Select and set in sequence the fields
SIDES
,
POSITIONS
,
SECTIONS
.
•
SIDES
: number of machine sides [1 or 2]
•
POSITIONS
: number of sensors for machine/side [1 to
128] (
in the example
7
).
•
SECTIONS
: number of subdivisions for each machine
side (
it must be an integer divisor of
POSITIONS
)
.
Once you have configured the machine.
The example above indicates a configuration with one
section, 1 machine side (
A
) and 7 positions (
sensors
) per
side.
IDENTIFY
to start the sensor identification.
•
The example shown indicates that the numbering
(
identification
) of the 7 configured sensors is going to
start. The flashing reference indicates the first sensor to
be identified (
A1
).
•
The display of all Boards will show
•
The green led will flash on all sensors.
•
Skim the touch light of the sensor you want to assign
the identifier A1; the green led of the sensor will turn
from flashing green to red.
•
On SMART MATRIX display, the identifier of the next
sensor (
A2
) will start flashing.
•
Skim the touch light of the indicated sensor and
continue with the numbering of all the remaining
sensors .
At the end of the numbering operation, the configuration
menu will re-appear.
To return to
SETUP
menu.
Содержание SMART MATRIX TWIST
