PAGE 7 OF 7
VertDesk™ Electric Height Adjustable Workstation Operation Instructions
Startup/Reset Procedure:
Step 1:
Plug the power cord from the control box into a standard 110 volt
receptacle. A power surge protector is recommended.
Step 2:
To set the workstation, press and hold the down
button on the
desk switch until the worksurface stops at its lowest position and clicks
several times. The VertDesk™ is now ready for use.
Reset Procedure: If you lose power or the workstation does not operate,
unplug the power for 30 seconds amd plug back in. Hold the down arrow until
the worksurface stops at its lowest point and clicks several times. The work-
station is now ready for use.
If you are having any problems with the previous steps, contact VertDesk™ at
866.733.0698 or at [email protected] .
Warranty Information:
VertDesk™ v2
products are warranted to be free of defects due to manufacturing or material as follows: 5 years
on gears and/or motors, including control box and switch; 10 years on support brackets, columns and feet.
VertDesk™ will replace any defective part after inspection by an authorized agent. Costs incurred due to product
replacement such as installation, labor charges or transportation are not covered under this warranty. (Includes all
purchases made after 10/5/15)
VertDesk™ v1
products are warranted to be free of defects due to manufacturing or material as follows: 2 years
on gears and/or motors, including control box and switch; 5 years on support brackets, columns and feet.
VertDesk™ will replace any defective part after inspection by an authorized agent. Costs incurred due to product
replacement such as installation, labor charges or transportation are not covered under this warranty. (Includes all
purchases made prior to 10/5/15)
Instruction # 52819
