BTM Scandinavia AB
●
Franska vägen 32
●
S-393 56 KALMAR
●
Tel: +46 480 868 75
●
www.btmscand.se
1.1 Marking
Customer:
Job No:
Model:
BTM Battery powered hand machine
ULBG452
Machine No.
Supplier:
BTM Scandinavia AB
1.2 Foreword
This manual should be used as a general instruction and assistance for maintenance
and operations staff.
The manual also contains description of Clinch tools its inspection and maintenance
as recommended. As an additional help for maintenance are drawings and parts lists.
Components and spare parts ordered from BTM Scandinavia AB
1. The punch must always be in its original position, posterior position. The punch is
hidden and protected by the holder (stripper). Punch tip is 1,3mm behind the holder
surface, to enable the punch to be protected from damage, and that the material is
compressed before Clinch process.
2. Never try to make a Clinch through another Clinch, through a spot weld or other
obstacles.
3. Never make a connection in stainless steel with these tools.
It is vital that the operator and maintenance personnel read this manual to become
familiar with Clinch equipment and associated tools
