MyHOME_Screen3,5
User guide
43
42
This control allows you to control the status of the burglar alarm system (enabled/disabled) and on
single zones.
Touch the burglar alarm icon .
The top part of the display will show the system status icon (when the padlock is open it indicates
that the system is disabled, when it is closed it indicates that the system is enabled); in the centre,
you can scroll the zones in which it is subdivided and check which are enabled.
Burglar alarm
1. System disabled.
2. System enabled.
3. Zona 1 activated.
4. Zona 2 deactivated.
Activate/deactivate the zones
When the burglar alarm is disarmed, it is possible to disable (or enable) one or more system zones.
In this way, you can customise the system operation according to your needs. You can for example
exclude the infrared sensor zones, leaving the perimeter zones active (Main door and windows),
and move freely inside the house without compromising on security.
To activate this customisation touch the confirmation icon: a page will appear where you can enter
your user code and confirm the active zones on the system.
Such customisation can only be performed when the system is off using the relevant icons for the
individual zones (not shown on the display when the system is on).
Perimeter
Basement
Perimeter
1
2
3
4
Basement
Содержание MYHOME SCREEN3,5
Страница 1: ...www homesystems legrandgroup com User guide MyHOME_Screen3 5...
Страница 2: ...MyHOME_Screen3 5 User guide...