RADIO CONTROL HA/HB4572 and H4572PI
4
This radio device can be used, together with other BTicino radio devices, in
both a traditional system
(to add house-automation
functions) and
a BTicino My Home system
to make full use of the benefits of radio technology in a mixed radio-wire bus system.
If the basic radio actuator is used in a traditional system it can control radio actuators directly. If instead it is used in a My Home system,
as well as directly controlling radio controls it can also control wire actuators and call system scenarios (by means of the transmitting
interface HC/HS4575N L/N/NT4575).
The radio control is available in two versions: item HA/HB4572 with frame for wall mounting and item H4572PI with frame for flush
mounting.
The only difference between the two versions is the supporting frame supplied with them and thus the mode of installation.
Configurator
socket
Tab to remove
battery
Luminous indicator,
LED
A
PL1
PL2
M
When the device is used for the first time the battery protection tab shown in the figure must be removed.
GB
A
PL1
PL2
M
item HA4572
for surface mounting
HB4572
for flush mounting
These versions can be installed on the wall using two-sided
adhesive tape (supplied), thus not requiring making holes in the
wall, or with normal rawlplugs.
This version can be flush mounted using
traditional Axolute supporting frames.
Battery
protection
Put the tab
in the socket
art. HB4572
for surface mounting
Battery
protection
Battery
protection
1
3
2
4
Key A
Key B
