![background image](http://html1.mh-extra.com/html/bticino/391861/391861_user-manual_2825511011.webp)
11
GB
Power:
Use the type of power indicated on label.
Plug:
Do not remove any of the prongs of the monitor’s three-pronged power plug.
Disconnect the power plug from the AC outlet under following conditions:
- If you will not use it for an extended period time.
- When the power cord or plug is damaged or frayed.
- If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician.
- If the products exhibits a distinct change in performance, service may be
required.
Power and extension cords:
- Do not allow anything to rest on the power cord.
- Do not locate this product where persons will walk on the cord.
- Use the power cord supplied with the equipment.
- Avoid to damage the power cord: if the power cord is broken change it as soon
as possible with an approved one according the European safety regulations.
- Avoid to use multiple sockets to connect the monitor to the power supply.
Environment
- Place the monitor on a flat and leveled surface.
- Overly hot, cold or humid places, places directly under sunlight, dusty
surroundings, equipment that generate strong magnetic field.
WARNING:
- 1 Do not face the camera towards the sun or intense light.
- 2 Do not point the camera towards the sun even if it is not filming.
- 3 Do not film when the light is too intense.
- 4 Install the camera in a place where it cannot get wet. If it gets wet, switch the power supply off
immediately and contact the After –Sales Centre.
- 5 Install the camera away from sources of video disturbance. When the camera cables are placed
near electric conductors or antenna for televisions, there may be disturbance to the picture. If this
happens, reposition the cables or install the devices again.
- 6 Check the room temperature and humidity. The picture quality may deteriorate or some parts of
the inside of the camera may be subject to faults if the room temperature is higher than the
indicated in the specifications. Do not use the camera in these circumstances.
- 7 Precautions must also be taken if the degree of humidity is high.