42
Interface Name
Connector
Function
RESET
RESET button
Restore factory default setup.
When system is running normally (power indication
light is red), press the RESET button for at least 5 s,
system will restore factory default setup.
AUDIO OUT
Audio output port
Audio output
3.5mm Jack port. Output audio port.
AUDIO IN
Audio input port
Audio input
3.5mm Jack port. Input audio port.
LAN
Network port
Ethernet port
Connect standard Ethernet cable.
Support PoE function.
SD
SD card port
Connect SD card.
Note:
When you install the SD card:
make sure current card is not in write mode then you
can install it to the camera.
When you remove the SD card
: make sure current
card is not in write mode.
Otherwise it may result in data loss or card damage.
Before hot swap, please stop record operation.
GND
Make sure the device is securely connected to earth.