![background image](http://html1.mh-extra.com/html/bticino/391715/391715_user-manual_2825492026.webp)
391715 - 391716 - 391717
26
a
Remove the ceiling tile from the ceiling and cut a
hole whose diameter is 30~40mm on the ceiling
tile to pass the wire(s) and cable(s) through to the
upside of the ceiling. (In case of the wiring and
cabling through the mounting surface only) Then
prepare the ceiling mount bracket. Pull the wire(s)
for the system as below. (Anchor Bolt 3/8”x70)
INSTALLATION WITH CEILING MOUNT BRACKET (391848)
b
Pull the wire(s) and cable(s) for the system as below.
Wire the cable(s) to the ports. Insert the mounting
hooks into the holes on the surface of the main body
and turn the main body. Assemble the main both
with the camera mount adaptor with the 3 screws.
(Machine M5x15)
+
0
c
Screw the dome cover to the main body and remove
the protection vinyl from the dome cover.
Important Notice
•
Before starting the installation, make sure that the Camera ID and Protocol are set up properly.
•
To adjust the installation height from the mounting surface, the pipe and coupler should be needed between
the surface mount part of the ceiling mount bracket and the camera mount part of the ceiling mount bracket.
Note that they are not supplied by the manufacturer.
+
0
+
0
Содержание 391715
Страница 17: ...17 DIMENSIONI MODELLO 691715 Corpo principale Tipo montaggio a soffitto Tipo montaggio a parete...
Страница 34: ...391715 391716 391717 34 DIMENSION 691715 Model Main Body Ceiling Mount Type Wall Mount Type...
Страница 35: ...35 DIMENSION 691716 391717 Models Main Body Ceilign Mount Type Wall Mount Type...
Страница 36: ......