Bticino 391715, Руководство пользователя, Страница: 25 / 36

25
a
Make a hole whose diameter is 30~40mm on the
mounting surface to pass the wire(s) and cable(s)
through the mounting surface. (In case of the wi-
ring and cabling through the mounting surface
only) Then prepare the wall mount bracket. Pull the
wire(s) and cable(s) for the system as below. Attach
the wall mount bracket to the mounting surface.
(Hex Lag #14x50)
INSTALLATION WITH WALL MOUNT BRACKET
b
Pull the wire(s) and cable(s) for the system as below.
Wire the cable(s) to the ports. Insert the mounting
hooks into the holes on the surface of the main body
and turn the main body. Assemble the main both
with the camera mount adaptor with the 3 screws.
(Machine M5x15)
c
Screw the dome cover to the main body and remove
the protection vinyl from the dome cover.
*
×
+
*
×
+
*
×
+
Important Notice
• Before starting the installation, make sure that the Camera ID and Protocol are set up properly.