BTI 4.3 TFT, Руководство по установке

Страница: 57 / 60

57
Parameter scale: Use this screen to set the maximum range for
boost pressure and various temperature slide bars and graphs.
Example: You will be running a 30 psi boost target. The max
boost pressure could be 35 psi to give the slide bars and graphs
the best resolution. The same goes for temperatures. These
values should be entered with respect to which units are
selected: SI or SAE. If SI units are selected, Boost Pressure
should be entered in kPa and temps should be entered in
Celsius. If SAE units are selected, Boost Pressure should be
entered in psi and temps in Fahrenheit.
Shift Light Configuration:
If Shift Light by gear is not checked, only Gear 1 will be
adjustable and the shift light will illuminate no matter what gear
you are in.
If Shift Light by Gear is checked, touch the gear that you wish to
change the shift light RPM on. That gear number will appear
above the up and down arrows for verification. Use the up and
down arrows to adjust the shift light RPM set-point of said gear.
Press the back arrow button at the bottom right hand corner to
save the settings. The shift light should flash once the settings
are saved.
Base Fuel Pressure configuration :
In order to calculate the base fuel pressure, the engine should
be idling and at running temperature. Press the CALCULATE
button and the base pressure will be calculated and displayed.
This is used on the fuel screen in order to graph the fuel
pressure vs. boost pressure for simple regulator function
verification.
The Base Fuel calculation is used to verify that your rising rate
fuel pressure regulator is working correctly as you should see
your peak fuel pressure rise with your peak MAP pressure
when you are one the Fuel screen.