18
19
Operation
Operation
Your Hearing Aid uses the following controls:
Rocker Switch Memory Control. See below.
Touch and Release Memory Control. See below.
surface. Repeat this motion until you are at the
minimum setting. The next time you touch the control
surface, the volume will increase one step. Continue to
touch and release until you reach the desired loudness.
NOTE:
If 10 minutes or more have passed since the last
volume change, the volume will automatically decrease
before it increases.
Volume Settings
Some hearing systems can be set for the Right device
to increase the volume and the Left device to decrease
the volume. Ask your hearing care professional if this
setting would benefit you.
Your device will always power-on to the optimal volume
setting determined by your hearing care professional.
The minimum and maximum steps will have an
additional tone following the beeps.
Ask your hearing professional about your specific
hearing programs.
Memory
Your hearing care professional can set up to four
hearing programs for you. These additional programs
are accessed by pressing the control surface/rocker
switch.
Rocker Switch Memory Control
When you press the switch, you
may hear an alert indicating the
device has changed to the next
program. To advance through
programs, press the top part of
the switch. To reverse cycle through
programs, press the bottom part of the switch.
Ask your hearing professional about
your specific hearing programs.
Touch and Release Memory Control
Your memory control is configured as
a Touch and Release memory control.
Each time you touch anywhere on the
control surface the memory of your
hearing instrument changes.
Volume Level
Tone
Level 5
(More volume)
Five beeps plus tone
Level 4
Four beeps
Level 3
(Power on volume level)
Three beeps
Level 2
Two beeps
Level 1
(Less volume)
One beep plus tone
