Revision 5
19
th
January 2021
Page | 39
EU DC Fast Charger (50kW & 100kW)
INSTALLATION AND USER’S MANUAL
This document is the
Property of BTCPower
Inc.
and shall not be
copied, reproduced, or used as the basis for sale or manufacture
of apparatus without written permission.
0x0080
Relay4 contact error or
fusion
Abnormality in contact and fusion state of Relay4
0x0200
Input over voltage
The input wiring was misconnected.
0x0400
Internal over temperature
The temperature of the module has exceeded the
allowable level.
0x0800
Module
–
Control board
communication error
Communication between the module and the control
board is not good.
0x8000
Input low voltage
The input wiring was misconnected.
426
0x0001
(Combo vehicle error)
Charging coupler has poor
locking status
(EV Fault-CCS) Charger Connector Lock Fault
Vehicle has not detected the Charge cord connector
locked into the inlet or failure where connector cannot
be unlocked from the charging inlet.
0x0002
(Combo vehicle error)
Deviation error in charge
current
(EV Fault-CCS) Charging Current differential
Indication that vehicle has stopped the charging session
after detecting that the charging station is not able to
maintain the current request.
0x0004
(Combo vehicle error)
Range/deviation error of
charging voltage
(EV Fault-CCS) Charging Voltage Out of range
Indication that vehicle has stopped the charging session
after detecting that the RESS is either under or above
normal operating voltage range.
0x0008
(Combo vehicle error)
compatibility error of
charging system
(EV Fault-CCS) Charging System Incompatibility
If the vehicle determines that the charging station is
incompatible. Using this value is optional; as an
alternative, the vehicle can use EVReady in DC_EV Status
Type equal to "FALSE"
0x0010
(Combo vehicle error)
Vehicle battery temperature
problem
(EV Fault-CCS) RESS Temperature Inhibit
Battery Temperature Inhibit, Battery too hot/cold to
accept charge.
0x0020
(Combo vehicle error)
Check the gear status of the
vehicle
(EV Fault-CCS) EV Shift Position
Vehicle Shift Position, Vehicle is not in Park.
0x0040
(Combo vehicle error)
Vehicle status/BMS error
(EV Fault-CCS) EV RESS Malfunction
Vehicle RESS Malfunction, Any non-recoverable fault or
error condition of the Vehicle RESS.
0x0200
(Combo error)
Vehicle - Control Board
Communication Error
Communication between EV and EV charger is not
working well.
0x0400
(Combo error)
Connector over
temperature error
The temperature of the charging cable has exceeded
the allowable range.
0x4000
(Combo error)
PLC modem status error
There is a problem with the state of the PLC
communicating with the vehicle in the charger.
431
0x0001
(CHAdeMO error)
Charge coupler locked poor
Charger Connector Lock Fault Vehicle has not detected
the Charge cord connector locked into the inlet or failure
where connector cannot be unlocked from the charging
inlet.
0x0002
(CHAdeMO error)
Charging system
compatibility error
Charging System Incompatibility If the vehicle
determines that the charging station is incompatible.
0x0004
(CHAdeMO vehicle error)
Vehicle battery overvoltage
EV battery status check
0x0008
(CHAdeMO vehicle error)
Vehicle battery low voltage
EV battery status check
0x0010
(CHAdeMO vehicle error)
Charge current deviation
error
The difference between the current required by EV and
the current required by EV chargers has occurred.