Power entry from bottom of enclosure
Fig. 2
Mount concrete anchor pad included with EVSE
Install concrete pad installation fixture as shown in figure 2. Use Qty 4, 3/8” inch x 2 inch (PN
RHPA-3830
)
concrete expansion bolts to anchor the steel pedestal provided with the EVP EVSE
unit.
A minimum of 4 expansion bolts should be mounted on the bottom enclosure footer.
In order to install the expansion bolts please follow the following steps:
INSTALLATION STEPS
Fig. 3
Expansion Bolt installation steps.
Qty 4 expansion bolts.
Please note installation
to existing concrete base
only.
This document is the
Property of Broadband Telecom Power
Inc.
and will not be copied, reproduced, or used as the basis
for sale or manufacture of apparatus without written
permission.
BTCPower EVP Series EVSE
Installation and Operations Manual
Rev C
Page 8 of 25