Fig. 16
EVP – 2001-00 Wall mounting bracket evse electrical service connection
To mount the EVP – 2001 – 00 EVSE onto your garage wall please follow these instructions.
1. Locate the wall studs in the wall you wish to hang the EVSE. It is critical that the screws
holding the EVSE to the wall are screwed into the solid wood of a stud, not just into the
wallboard.
2. When you find the center of a stud, mark it with pencil on the wall. Measure the vertical
distance between the screw holes on the mount.
3. Using the mounting bracket provided (Fig. 16) mark the location where the lag bolts will
be placed.
4. Double check that the mount will be level using a level. It is crucial that you mount it level.
5. Drill qty 6 15/64 inch pilot holes used to install the mounting bracket onto the wall.
This document is the
Property of Broadband Telecom Power
Inc.
and will not be copied, reproduced, or used as the basis
for sale or manufacture of apparatus without written
permission.
BTCPower EVP Series EVSE
Installation and Operations Manual
Rev C
Page 17 of 25