BTC BCO4816IM, Руководство пользователя

Страница: 8 / 20

COMBO DRIVE
MASTER
CSEL
SLAVE
JUMPER
Improper or conflicting setting will cause the unit not detected by your
system.
Hardware Installation
1. Turn off the power to your computer system and all peripheral
devices.
2. Disconnect all cables and connectors from the back of your
computer, and then remove the cover from the computer.
3. Insert the Combo Drive into one of the vacant 5.25" drive bays and
secure it to your PC with all four mounting screws.
4. Connect one end of the 40-pin IDE cable to the IDE connector of
the Combo Drive and the other end to the IDE port on your
motherboard. Also, connect the power supply cable to the back of
the drive.
The red-edge of the IDE cable must be connected to Pin 1 on the Drive.
4