Dual Digital Drive
5
5. If you have a sound card that can be connected to the drive, you
can also connect the drive (as Audio-Out) and the sound card (as
Audio-in) with a 4-pin audio cable.
If your mainboad is integrated with built-in sound system, plug the
4-pin audio cable into the CD-IN connector on the mainboard as
Audio-in.
6. Connect the USB cable at the back of the drive to the USB
connector on the mainboard. The red wire of the cable needs to
plug into Pin 1 on the board.
This drive supports USB 1.1 and if you connect to USB 2.0
connector, only transfer rate of USB 1.1 will be available.
IDE
RED WIRE
MOTHER
BOARD
USB
RED WIRE
7. Re-attach the cover of the computer, and reconnect the power
cord and all cables to the computer.
