Edition 5
10 March ‘99
Setting up
6
6 Wall-mounting (optional)
Before you start, ensure that the telephone is
in easy reach of the power supply and a
telephone socket, and that the wall can support
the weight of your Response 130.
• Drill two holes for the screws and insert the
wallplugs provided (if you need them).
• Insert the screws leaving about 2 - 3 mm
sticking out to hang the bracket from.
A stencil is printed at the back of this guide
(page 30) which you can use to mark where you
will put the screws into the wall.
Attach the bracket by hooking
it over the screws protruding from
the wall.
Handset park
When wall mounted, if you need to temporarily
move away from the phone during a conversation
you can hook the handset on the handset park
located on the top of your Response 130.
• Pull out and turn the handset catch around
to prevent the handset falling off the base
when in the upright position.
• Attach the bracket and hang your Response
130 on the wall as shown below.
Wall
Wallplug
Screw
