BT OSE100 Скачать руководство пользователя | Manualshive

Страница: 48 / 62

background image

Maintenance

© BT Industries AB 222714-040

48

• Bear in mind that the oil in the transmission or the hydraulic

system can be hot.

WARNING!

Risk of burns.
Hot transmission and hydraulic oil.
Let the truck cool before replacing the oil.

• Only fill the hydraulic system with new and clean oil.

WARNING!

The hydraulic system can be damaged.
If the oil is contaminated hydraulic components can be dam-
aged.
Always use new and clean oil in the hydraulic system.

• Store and dispose of changed oil in accordance with local

directives.

• Do not release solvents and the like, which are used for

cleaning/washing, into drains that are not intended for this
purpose. Follow the local directives that apply for disposal.

• Disconnect the battery when welding on the truck.

NOTE!

The battery can be damaged.
When welding using an electric power source the welding cur-
rent can enter the battery.
The battery should therefore be disconnected.

• Remove at least 100 mm (4”) of paint around the welding/

grinding area through sand-blasting or the use of a paint strip-
per when welding or grinding on painted surfaces.

CAUTION!

Harmful gases.
Paint that is heated gives off harmful gases.
Remove 100 mm (4”) of paint from the work area.

• When working underneath the truck, support the truck on

trestle-blocks.

WARNING!

Risk of crushing.
A badly supported truck can fall.
Never work under a truck that is not supported on trestle-
blocks and secured by a lifting device.

«
...
46
47
48
49
50
...
»

Содержание OSE100































































Отзывы:

Нет отзывов

Похожие инструкции для OSE100

Бренд: UTILEV Страницы: 149

Robotino 8029453

Бренд: Festo Страницы: 20

Бренд: agrimac Страницы: 40

Carretillas Elevadoras TW12

Бренд: agrimac Страницы: 40

Бренд: cascade corporation Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды