manualshive.com logo in svg

BT OSE100, Руководство оператора

Поделиться
Скачать
BT OSE100 Скачать руководство пользователя страница 41

Battery

© BT Industries AB 222714-040

41

Charging the battery

GENERAL PROHIBITION

When charging the battery it is absolutely prohibited to smoke 
or use a naked flame.

Use an automatic battery charger intended for charging traction 
batteries.

The charger shall have an automatic maintenance charging fea-
ture for a certain period after the main charging period has been 
completed. This eliminates the risk of overcharging the battery 
and the need to monitor the charging procedure is reduced to a 
minimum.

The charger shall have a minimum charging current of: 

WARNING!

Corrosive acid.
The battery fluid contains sulphuric acid. Fluid spilt on the skin 
should be rinsed off immediately. Wash thoroughly with soap 
and water.
If the fluid has come into contact with the eyes, wash the eyes 
immediately using an eye shower, contact a doctor.

ALWAYS WEAR PROTECTIVE GLASSES AND PROTECTIVE 
GLOVES WHEN CHECKING THE BATTERY!

Before charging

• Park the truck in the assigned charging area.

• Ensure nothing prevents ventilation above the battery.

• Remove the emergency disconnector.

• Make sure the battery charger is switched off.

• Connect the battery charger to the permanently fitted battery 

connector.

• Start the charging unit.

WARNING!

Risk of EXPLOSION.
During the charging process oxygen and hydrogen gases are 
always formed in the battery.
Short-circuits, naked flames and sparks in the vicinity of the 
battery can cause an EXPLOSION. 
Always switch off the charging current BEFORE removing the 
battery connector.
Provide good ventilation, especially if the battery is charged in 
a confined area.

Battery (Ah)

Charger (A)

465 - 620

80 - 110

Содержание OSE100































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды