Using your BT Digital Baby Monitor 350 Lightshow
If you experience any problems, please call the Helpline on Freephone 0800 145 6789* or visit bt.com/producthelp
30
3. The display will show
02h:00m
(or the currently
set timer). Use the and buttons to
select the first digit and press
. Repeat this
procedure for each digit and press
. The display will
show
Saved
and you’ll hear a confirmation beep.
Start the feed timer countdown
1. Press
.
Lightshow
is displayed, press until
Feed
Timer
is displayed and press
.
2.
Start?
is displayed, press
. The display will
briefly show
Timer
On
and then the timer will be
shown counting down the seconds from the time
you set.
When the timer has finished counting down to
00:00
you will hear an alert beep and the timer
and
icon will flash. Press any button on the
Parent unit to stop the alert. If you do not stop the
alert it will automatically stop after 2 minutes (or it
will start again if Timer Repeat has been set to On).
The timer can be set from 1
minute to 99 hours 59 minutes.
The feed timer default
countdown duration is set at
02:00 (2 hours).
If the Parent unit is switched
off, the feed timer countdown
will be cancelled and you will
need to start it again when the
unit is switched back on. The
duration, alert type and repeat
settings will still be retained.
2292 Baby Monitor 350 UG [4].indd 30
17/06/2014 14:10
