BT DECTfax Скачать руководство пользователя

Страница: 41 / 48

Help

If you have any problems using your DECTfax, this section

will give you the most common, easy-to-follow solutions.

Fax Problem

Solution

Blank unit display.

The unit does not answer

incoming calls after several rings.

Blank photocopies.

The telephone exchange does not

recognise the number dialled.

The terminal does not ring.

The telephone does not work.

One or more vertical black lines on

documents copied locally or sent.

The unit displays the following messages:

OUT OF PAPER
PRINTER COVER
PAPER JAM

OVERHEATING

GAUGE EMPTY
MISSING GAUGE

CHANGE RIBBON
REMOVE DOCUMENT
MEMORY FULL

Other

• Check that the power cord and the power adopter cord are properly connected

• The

FAX

icon may be off: check the receive mode (Manual/automatic).

• Check the number of rings.

• Configure the unit for “private network” (see the sections headed

‘Ring settings’

and

‘Network and dial settings’

in the

‘Setting up’

chapter).

• The document was positioned was positioned facing the wrong way round in the feeder.

• Check.that the the telephone cord is properly plugged in.

• Configure your unit for pulse dialling (see the section headed

‘Pulse/tone dialling’

.in the

Setting up’

chapter).

• The

TEL

icon is flashing: re-activate the ringing tone (see the section headed

‘Setting the ringing tone’

in the

Setting up’

chapter).

• The mains may be down.

• Check that the telephone line cord is properly connected.

• Open the cover and clean the scanning sub-assembly located opposite the white roller

using a soft but not fluffy cloth dipped in surgical spirit. After cleaning, close the front

cover and make a local copy to check that the black lines have disappeared.

• Insert more paper in the paper feeder.

• Close the rear cover.

• Open the rear cover to access the paper circuit. Check that the rear cover is properly

secured after closing it.

• The last documents printed printed out are blackened; the printer’s temperature is too

high. Wait a few minutes for it to cool down

• You may have forgotten to replace the gauge smartcard when you put in the ink ribbon.

• Open the gauge housing flap and check that the gauge smartcard is inserted and

correctly positioned.

• No ink ribbon left: install a new ribbon and gauge.

• Open the front cover and check the document circuit.

• Print out faxes received and/or listen to the voice messages on the TAD (model with

built-in

Tad

only).

• Disconnect your unit from the mains and reconnect it. If the problem persists, contact

our Helpline on 0845 603 1066.

Содержание DECTfax

















































Результаты поиска

Содержание DECTfax

Отзывы:

Похожие инструкции для DECTfax

Бренды по названию

Популярные бренды

BT DECTfax, Руководство пользователя

Результаты поиска

Содержание DECTfax

Отзывы:

Похожие инструкции для DECTfax

Бренды по названию

Популярные бренды