BT Cordless Headset H55, Быстрая настройка и руководство пользователя, Страница: 49 / 56

Help 49
3 Click on the “Input” tab and select your
microphone as the “Sound Input” device, and
then adjust the “Input volume” slider to the
desired level.
4 Close the window when done.
• If you still cannot hear audio through your
computer speakers, adjust the audio settings of
the software program you are using. Refer to the
help documentation of your software program for
detailed instructions.
I want to use my headset with a different
headset base.
• You need to de-register the headset from the
current headset base (page 42), and then register it
to the new headset base (page 40).
I cannot answer an incoming call in PC mode.
• Your headset cannot directly answer a call to your
computer. You must answer all incoming calls on
your computer through your VoIP program.
• Make sure PC mode is selected on the headset base
and the PC light is on.
• Make sure you have pressed on your headset to
receive the audio from your computer.
• Make sure the headset listening volume is turned
on and set to an audible level in your computer
audio settings and your VoIP calling software.
My calls cut in and out while I’m using my
cordless headset.
• Other electronic products such as TVs, radios,
computers and other DECT phones can cause
interference with your cordless headset. Try
installing your headset base as far away as possible
from these types of electronic devices.
• Do not install the headset near a microwave
oven or on the same electrical outlet. You may
experience decreased performance while the
microwave oven is operating.
• If your headset is located near a modem, move
your headset and modem further apart from each
other.
• Relocate your headset base to a higher location.
The headset will have better reception when not
installed in a low area.
• If other phones in your home or office are having
the same problem, the problem is in your wiring
or local service. Contact your telephone service
provider (charges may apply).
The light on the headset is off while charging.
• Make sure the power and line cords are plugged in
correctly and securely.
• Make sure that the battery is securely installed in
the cordless headset.
• Make sure the headset is sitting properly in the
base to charge.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp