BT Cordless Headset H55, Быстрая настройка и руководство пользователя

Страница: 50 / 56

Help 50
• Unplug the unit’s electrical power. Wait for 15
seconds, then plug it back in. Allow up to one
minute for the cordless headset and headset base
to reset.
• Clean the cordless headset and headset base
charging contacts each month using a pencil eraser
or dry cloth.
Common cure for electronic equipment.
• If the unit does not seem to be responding
normally, try putting the cordless headset in its
base. If it does not respond, do the following (in
the order listed):
1 Disconnect the power to the headset base.
2 Remove the cordless headset battery.
3 Wait a few minutes.
4 Connect the power to the headset base.
5 Install the battery again, and then place the
cordless headset into the headset base.
6 Wait for the cordless headset to reestablish its
connection with the headset base. Allow up to one
minute for this to take place.
What is the lifter port for?
• The Lifter facility offers you the advantage of
answering and ending calls remotely away from
your desk. To make use of this facility please go
to bt.com/producthelp for a list of compatible
lifters.
If you need some help, call us on 0800 218 2182* or go to bt.com/producthelp