Receiving faxes
By pressing the
RX MODE
button you can
set your PaperJet 55E to receive a
document in three different ways:
Press to display the following settings.
AUTOMATIC RX
– This is Automatic reception.
Your fax machine automatically answers fax
calls (this is the default setting).
MANUAL RX
– This is Manual reception.
You answer calls in person and receive faxes
by pressing the Start button if you hear the
fax tones.
PHONE/FAX RX
– This is Automatic reception
with call recognition. After the set number
of rings (default 4), your fax machine will
answer the call. If it is a fax, it is received.
If it is a voice call the machine beeps for up
to 20 seconds and the display shows
LIFT
HANDSET
. If you do not lift the handset the
machine prepares to receive a fax.
If you pick up the phone before your
machine takes the call and you hear fax
tones, press the
Start
button to begin
reception and hang up the handset.
21
CANCEL – the machine cancels the
memory setting and returns to standby.
CHANGE PARAM? – you can change the
fax number and time settings. Display
shows
TYPE TIME
.
Change the time if required.
Display shows
TYPE NUMBER
and the
number already entered.
You can change the number if required.
Repeat the 2 steps above for all the numbers
that have been entered.
If the list contains less than 10 numbers the
display shows
TYPE FAX NUMBER
.
Enter a new number if required.
Repeat the last step until you have entered
all the numbers you want up to a maximum
of 10.
After entering your last number press
Start
again to confirm. Display shows
AUTOMATIC RX
(or current receive mode)
and
MEMORY TX
.
/
/
/
