4. After 24 hours, plug the telephone line cord into the wall
socket and your BT Calypso base.
Your BT Calypso is now ready for use.
Additionally, if you have purchased a BT Calypso
multiple pack
1. On each charger, connect the mains power adaptor to
the charger and switch on.
9
Getting started
Battery performance
To keep your batteries in the best
conditions, leave the handset off
the base for a few hours at a time
(after the initial 24 hour charge).
Please note however, that new
NiMH batteries do not reach full
capacity until they have been in
normal use for several days.
Running the batteries right down
at least once a week will help them
last as long as possible.
The charge capacity of rechargeable
batteries will reduce with time as
they wear out, so reducing the
talk/standby time of the handset.
Eventually they will need to be
replaced. New batteries can be
obtained from the BT Calypso
Helpline
0870 605 8047
.
BT Calypso 225 – Edition 03 – 20.10.05 – 6875
If you experience any problems, please call the Helpline on
0870 605 8047
Ensure the charger is connected to
the mains at all times.
Do not mix up the power adaptors
between the base and additional
handset charger.
Telephone line cord
Power adaptor cable