32
The small print
Warranty
Your BT Business Hub 3 will arrive fault-free and
will work like it should for the minimum period of
your contract. If during that time it stops working,
and you’ve followed the advice on page 4, you
should contact us. If we ask you to return it, we’ll
decide to replace or repair it – except if the fault’s
caused by general use, accidental or deliberate
damage, not using it properly or not following the
instructions in this User guide. If you return it, we
may test it. If it’s working, we’ll send it back to
you – but you might need to pay our testing and
postage costs. This doesn’t affect your legal rights.
Safety and regulatory instructions for your
BT Business Hub
Please read this document carefully before set-up.
•
Your Hub will get warm once connected to the
power supply. Although this is normal, you
should make sure that your Hub has adequate
ventilation to prevent overheating. Never block
the vents on your Hub.
•
Don’t expose your Hub to rain, water, moisture
or direct sunshine.
•
Don’t spill liquid on your Hub.
•
Keep your Hub away from sources of heat such
as heaters or radiators.
•
Don’t try to disassemble or open up your Hub
yourself. Not only will it make your warranty
void, it may expose you to dangerous voltage or
other hazards.
The small print
•
Before cleaning your Hub, disconnect its power
supply. Use a damp cloth for cleaning.
•
For better performance, don’t place your Hub on
a television or computer monitor.
•
If there’s an electrical storm, you must unplug
all of your equipment from the electricity supply
and phone sockets.
•
The BT Business Hub intentionally generates
low-level radio frequency signals and so there’s a
very small risk that it may interfere with sensitive
medical devices, for example a heart pacemaker,
when nearby. If you’ve any concerns, we
recommend that you consult the medical device
manufacturer before using your BT Business Hub.
•
The plug on the power cable serves as a
disconnect device. Make sure that the power
socket you plug the power cable into is easily
accessible and located as close to the equipment
as possible. Important: please make sure you
always use the power cable supplied with your
new Hub – don’t use any other power cable.
