When in the main menu, each press of
will step to the next menu item down.
Use
to step back up and eventually return to the top of the menu. See figure 7 on
the next page for the full main menu options.
Pressing the Enter button on any menu item will enter the sub-menu and take you into
edit mode. This will allow the function to be changed. Depending on the menu item will
depend on the structure of the sub-menu.
Button configuration
Enter the button configuration mode by holding down the centre configuration button
(Enter) for three seconds.
Some menu items have more options. For example, Output 2 has three options: User, RPS
and Keyswitch. On these menus, press the Enter button to enter the sub-menu, then use
the down and up arrows to move through the options with each press. Holding the Enter
button for five seconds will save changes – the display will read ‘Notice – Saved!’
Some more complex menu items use the Enter button to scroll through additional items
in the sub-menu, too – for example, Network IP Addresses to be input.
You can exit Edit mode at any time, without saving changes, by pressing
for five
seconds. This will return you to the sub-menu that you were making changes in.
Exit the configuration menu at any time without saving any changes by pressing
for
five seconds. This will take you back to the scrolling status display.
The unit will then display
‘Configuration’.
Press the Enter button again
and the display will show the
first menu option.
Configuration
Inputs
Inputs
Output Type 2*
Keyswitch
Notice –
Saved!
Inputs
You are in edit mode, and changes
can be made, if you see a * next to
the menu title.
Many menu items simply have
two options. Use the down and
up arrow to switch between the
two. Press and hold the Enter
button to save changes. Display
will read ‘Notice – Saved!’
1277 3427 5899
1287 5675 8214
WPS
13
Содержание Essential IP
Страница 1: ...Essential IP Installation Guide...
