BT Paintball Rip-Clip, Руководство пользователя

Страница: 6 / 16

4
INSTRUCTIONS
1. Battery Installation.
Remove the screw on top of battery door.
Install 4 x AA batteries following the polarity marking (Figure 1).
Reinstall the battery door screw.
2. Rip-Clip Installation.
• Loosen up the spring screws (Figure 2).
• Clip on the BT-4 approx. 3/4" from the front (Figure 3).
• Make sure the feed holes are aligned (Figure 4).
• Tighten up the spring screws (Figure 5).
Figure 2 Figure 3 Figure 4 Figure 5
Figure 1
Rip Clip Manual_1.qxp 7/24/07 2:25 PM Page 4