3
Using your headset
Answering a call
Wait for the headset to ring, then press the multi-function button to accept the call or answer the call via your mobile phone in
the normal way.
Remark: The LED will flash red three times continuously whenever receiving a call.
Ending a call
Press the multifunction button to end your call or end the call via mobile phone.
Dialing from your mobile phone
Simply make calls on your mobile phone in the normal way.
Voice Dialing from your headset
If the mobile is equipped with the voice dialing function, press the VOL- button about 2 seconds and when you hear a beep,
say the voice tag.
Remark: Please make sure to record voice tag into the mobile phone first before using voice dialing function.
Last number redialing
Briefly press the multi-function button twice, you will hear a beep .The last number will be redialed after you hear two beeps
again.
Remark: The voice dialing and last number redialing functions are only applicable to mobile phone with Bluetooth
handsfree profile.
Functionality varies depending on the mobile phone model you have.
Please refer to your mobile phone user guide for additional information.
Adjusting the volume
Press the VOL+ or VOL- repeatedly until the desired volume level is reached.
Adjust the earphone volume
To increase or decrease the headset volume during a call, use the volume keys on your headset
.
Mute or unmute the microphone
To mute or unmute the microphone during a call, press VOL+ and VOL - button. Release the button after "Beep". Mute
microphone on.
Press VOL+ or VOL- button to unmute the microphone.
Clear the settings
If you want to clear all the settings from the headset. press the VOL+ and VOL- button over 4 seconds, you will see the red and
green indicator lights alternate for several seconds and headset beeps twice, the headset will shut up then , all setting are
cleared.
Call waiting
If another party calls while you are having a conversation, press the multi-function and VOL – buttons for 2 seconds to hold
the first call and the second call can be answered. Press the multi-function button twice to end all calls.
Use the headset with several phones
You can pair the headset with up to eight phones but connect it to only one phone at a time
The phone that was first paired with the headset is the default phone.
If the headset is switched on with 10 meters (30 feet) of several paired phones, the headset tries to connect to the last used
phone. If the headset cannot connect to the last used phone, the headset tries to connect to the default phone. If the headset
cannot connect to this phone either, one of the other six paired phones can be connected to the headset. To make the
connection, see the user guide of your phone.
Troubleshooting
If you are unable to connect your headset and mobile phone, please try the following:
*Ensure the headset is turned on and is properly charged.
*Ensure the headset is paired with your mobile phone.
*Ensure the mobile phone’s Bluetooth feature is activated. Please refer to your mobile phone user guide for specific
instruction.
*Ensure the headset is within a maximum of 15m from your mobile phone(s) and there are no obstructions, such as walls or
