7
button to close the dic holder. The number of
tracks of the disc is displayed and the total
time disc during 2 seconds. The CUE point is
automatically fixed at the start point of the
first track.
Note :
-
Don’t place objet or more than one disc on
disc holder.
-
Don’t push the disc holder with your finger. It
would damage it.
Selecting tracks.
-
Press SKIP button once to move to one
higher or lower track.
-
Hold the SKIP button to change tracks
continuously at a higher speed.
-
When a new track is selected during the
playback, playback begins as soon as the
skip search operation is completed.
-
If the SKIP >>I button is pressed while the
last track is playing, the first track is selected.
In the same way, if the SKIP I<< button is
pressed while the first track is playing, the
last track is selected.
Starting playback.
-
Press the PLAY / PAUSE button during the
pause or CUE condition to start playback, the
play indicator lights.
-
The point at which playback starts is
automatically stored in the memory as the
CUE point. The pickup then returns to the
CUE point when the CUE button is pressed.
( Back CUE ).
Stopping playback.
-
There are two ways to stop playback :
Press the PLAY / PAUSE button during the
playback to pause at the point.
Press the CUE button during playback to
return to the CUE point and enter pause
condition ( Back CUE ).
Matching the beat per minute ( BPM )
-
There are three tools for matching the BPM of
two CDs.
1) Use the pitch potentiometer to
adjust the BPM statically.
2) Use the pitch bend to adjust the
BPM temporarily.
3) Use the jog in the same way of
the pitch bend.
1) Pitch Potentiometer
To adjust the BPM by sliding the pitch
potentiometer up or down, press the pitch button
to turn on the pitch adjustement function before
use.
Slide the pitch potentiometer up to decrease BPM
or down to increase the BPM. The adjustement
range is +/- 8%, +/-12% or +/-16%
2) Pitch bend
- The BPM increases or decreases
respectively while the pitch bend + or pitch
bend – button is pressed.
- The BPM increase depends on how long
you hold the button. If you hold the button
for about ½ second, The BPM will go eith
er
to +16% for the pitch bend + or –16% for
the pitch bend -. If you tap the button, the
BPM will only change a little so you can
change the beat slightly without audible
changes in the music.
- The CD will return to the tempo indicated by
the pitch potentiometer when you let the
pitch bend + or - go.
- The next drawing shows an example of how
to use the pitch bend function. In this
example, both player are playing, the BPM
has already been matched with the pitch
potentiometers.
3) Jog
- Turn the jog dial clockwise during play to
increase the BPM in the forward direction,
counterclockwise to decrease the BPM in
the reverse direction. The faster you turn
the wheel, the more the BPM changes. The
BPM changes with a range of +/- 16%
- When you relase jog wheel, the CD will
return to the tempo indicated by the pitch
potentiometer.
Program Play
- Press the program button, the player will
enter the program mode and the CD will
stop rotating.
- Select the desired track by pressing the
SKIP button, then press the program button
again. The selected track will be added to
the program sequence.
- Repeat step 2 operation. A maximum of 30
tracks can be programmed at one time.
- Press the PLAY / PAUSE button to start the
program play from the first selection.
- Press the program button again during
program play to stop play.
- Press and hold the program button more
than 2 seconds to cancel the program mode
and erase all the current program contents.
Loop play
- Press the LOOP button to set the loop start
point A, The loop indicator will flash on the
LCD.
- Press the LOOP button again to set the loop
end point B, after the point B is set, the
playback will enter the loop play from A to B
repeatedly.
- Press the LOOP button again, the loop play
function is canceled, the loop indicator goes
out.
Frame search
- Frame search is a function for monitoring the
sound at a certain section of the disc and
manually change the position. Searching is
used to set play start points with precision.
- Turn the JOG dial while in pause or CUE mode
to begin searching. The sound for one
revolution of the disc is output repeatedly. The
