BST CDD 218, Руководство пользователя

Страница: 6 / 8

6
11. DISPLAY
A D B
C E
A : Track number
B : Time
C : Time mode : elapsed or remaining
D : Play mode : Single or continu
E : Pitch value
12. PROG BUTTON
If you push this knob, the unit enter in the program mode (
see operation later )
13. SGL ( SINGLE )
Press this button to switch between the SINGLE and
CONTINUOUS play mode. The selected mode is indicated on
the LCD. In SINGLE mode, after each track, the unit stop the
reading. In continu mode, the unit read all track and stops.
14. +10 BUTTON
Use this switch to jump 1 track at one press ( ex : with this
knob, you can jump from the track 1 to the track 11 ).
15. TIME BUTTON
Used this knob to choose the time mode : Elapsed time or
remaining time.
16. SKIP FORWARD BUTTON
Used this knob to select the next track.
17. SKIP BACK BUTTON
Use this switch to re-start the track or to select the last track.
18. OPEN / CLOSE BUTTON
Press to load or eject disk. Each press will open or close the
disk tray.
NOTE: disc holder will not open unless stop or pause button
has been pushed first.
Connexions :
19. MINI-DIN SOCKET
These sockets are used to connect the remote control to the
main unit. Use the Mini-din cable to connect it.
20. LINE OUT OUTPUT
The audio for each CD player is an output for these jacks.
Connect to the line input of the mixer.
21. POWER SUPPLY SELECTOR
Used this selector to choose the good Power supply. ( several
countries have another power supply )
22. DIGITAL OUTPUT
These jacks are digital outputs of each CD player. Connect to
the line input of the D/A Amplifier.
23. POWER SUPPLY SOCKET
Used to connect the AC mains power to the unit.
24. START REMOTE CONTROL
These sockets are to connect to a mixer using a 3.5mm jack
plug to give start capability. When the switch contacts are
shorted, the respective unit play, and similary when the switch
contact are open, the player will be in pause mode.
FUNCTIONS :
Opening & closing the disc holder.
-
Switch the unit on. Push the OPEN / CLOSE
button to open the disc holder.
-
You can’t open the disc holder when the unit
is reading ( to avoid the read trouble ).
Push the START / PAUSE before pushing
the OPEN / CLOSE button.
Loading discs
-
Take the disc by each sides and put it on the
disc holder, then push the OPEN / CLOSE