flashing character will change to
CONLY
(press
UP
the flashing character will change to
CFREE
), and
then press
SET
to save it or wait about 3 seconds until the system saves the mode automatically. The
characters will stop flashing.
•
C.FREE
: When the chairman’s microphone priority button is pressed, the chairman’s microphone is turned
on while the delegate’s microphone is turned off. However, the delegate’s microphone can be turned on
again even if the Priority button on the chairman microphone has not been released.
Mode setting method: please see
C.ONLY
setting method
•
1MAX-LIMIT
: The system allows only 1 delegate microphone to be turned on at the same time. If other
delegate microphones want to turn on, the active delegate microphone must first be turned off.
Number setting method
: Press SET key one or several times till “
4MAX
” is flashing. Press DOWN or UP key
till the flashing message changes to
1MAX
. Press
SET
to save or wait about 3 seconds until the system saves
the setting automatically. The characters will stop flashing.
Mode setting method
: Press
SET
key one or several times till “
FIFO
” is flashing. Press UP key, the flashing
characters change to
LIMIT
(press
DOWN
and the flashing characters will change back to
FIFO
). Press
SET
to save or wait about 3 seconds until the system saves the setting automatically. The characters will stop
flashing.
•
2MAX-LIMIT
: The system allows only 2 delegate microphones to be turned on at the same time. If other
delegate microphones want to turn on, the user should turn off 1 or 2 microphones first.
Setting method: please see 1MAX-LIMIT setting method
•
3MAX-LIMIT
: The system allows only 3 delegate microphones to be turned on at the same time. If other
delegate microphones want to turn on, the user should turn off 1, 2 or 3 microphones first.
Setting method: please see 1MAX-LIMIT setting method
•
4MAX-LIMIT
: The system allows only 4 delegate microphones to be turned on at the same time. If other
delegate microphones want to turn on, the user should turn off 1, 2, 3 or 4 microphones first.
Setting method: please see 1MAX-LIMIT setting method
•
1MAX-FIFO
: The system allows only 1 delegate microphone to be turned on at the same time. If another de-
legate microphone turns on, the system will turn off the first on microphone automatically. First in, first out.
Setting method: please see 1MAX-LIMIT setting method
•
2MAX-FIFO
: The system allows only 2 delegate microphones to be turned on at the same time. If another
delegate microphone turns on, the system will turn off the first on microphone automatically.
Setting method: please see 1MAX-LIMIT setting method
•
3MAX-FIFO
: The system allows only 3 delegate microphones to be turned on at the same time. If another
delegate microphone turns on, the system will turn off the first on microphone automatically.
Setting method: please see 1MAX-LIMIT setting method
•
4MAX-FIFO
: The system allows only 4 delegate microphones to be turned on at the same time. If another
delegate microphone turns on, the system will turn off the first on microphone automatically.
Setting method: please see 1MAX-LIMIT setting method
Please note: The Chairman microphone is not limited in these modes, the chairman microphone can be turned on and off independently any time.
d. System audio channel setting
System default audio channel: 40[05-35-65-95]
•
Chairman microphone audio channel
•
Manual setting: Press the SET key once or several times till “40” character is flashing. Press
DOWN
or
UP
key to select the channel. Press SET to save the setting or wait about 3 seconds until the system
12
• HTX-38R
