RECOMMENDATIONS FOR BATTERIES
This symbol indicates that used batteries should not be disposed of with household waste but deposited in separate collection points for recycling.
ATTENTION:
Danger of explosion if battery is incorrectly placed. Only replace by the same or equivalent type.
WARNING
Do not swallow the battery. Danger of chemical burns.
Keep new and old batteries out of the reach of children.
If the battery compartment doesn’t close properly, stop using the product and keep it out of the reach of children.
If you are in doubt whether the batteries have been swallowed or introduced into any other part of the body, contact immediately a doctor.
FRONT PANEL CONNECTIONS
REAR PANEL CONNECTIONS
WARNING - ATTENTION
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE
CHOC ELECTRIQUE.
NE PAS OUVRIR
ASSEMBLED IN PRC FOR / ASSEMBLÉ EN RPC POUR LOTRONIC SA
AV. ZÉNOBE GRAMME 9 - B-1480 SAINTES
TYP/TYPE .....................................................APM2826
CODE ................................................................ 95-1007
SUPPLY - ALIMENT. ................................. 230V~50Hz
BT freq. BT........................................... 2402-2480MHz
Max BT Pow. - Puiss. Max. BT................12.48 dBm
CONS. ...................................................................350W
POWER-PUISS. ...................................................240W
FUSE - FUSIBLE........................................................ 4A
OUTPUTS-SORTIES ................................. 70V & 100V
POWER IN
230V~50Hz
RCA Jack
FM antenna
6.35 Jack
External audio source
EMC signal
Loudspeakers with transformer
Loudspeakers with transformer
Fuse
AC220-240V
SPEAKER CONNECTIONS
Important Notes:
This amplifier has different loudspeakers outputs of 100V, 70V and low impedance 4~16
Ω
.
It’s only possible to use one output at the same time, connecting more than one may damage internal parts
of the amplifier. Each of the 100V, 70V, 4~16Ω terminals must work with the COM (common) terminal.
The built-in step-down transformer is most commonly used in PA systems with 70 or 100V loudspeakers. All
loudspeakers are wired in parallel and the sum of their power must not exceed the rated output power of the
amplifier.
It is advisable not to load the amplifier at more than 70% to 80% of its rated output power when
using music sources
.
[ APM2826 ]
USB Flash Disk
Microphone
APM2826 / APM2836
•
5