REAR PANEL
1
2
3
4
5
6
7
8
9 10 1112
13 14
WARNING - ATTENTION
RISK OF
ELECTRIC SHOCK
DO NOT OPEN
RISQUE DE
CHOC ELECTRIQUE.
NE PAS OUVRIR
ASSEMBLED IN PRC FOR / ASSEMBLÉ EN RPC POUR LOTRONIC SA
AV. ZÉNOBE GRAMME 9 - B-1480 SAINTES
TYP/TYPE .....................................................APM2826
CODE ................................................................ 95-1007
SUPPLY - ALIMENT. ................................. 230V~50Hz
BT freq. BT........................................... 2402-2480MHz
Max BT Pow. - Puiss. Max. BT................12.48 dBm
CONS. ...................................................................350W
POWER-PUISS. ...................................................240W
FUSE - FUSIBLE........................................................ 4A
OUTPUTS-SORTIES ................................. 70V & 100V
POWER IN
230V~50Hz
1. COM & 4~16
Ω
: For loudspeakers without transformer.
2.
COM & 70V: Use these two connectors when there is only one zone of 70V loudspeakers.
3.
COM & 100V: Use these two connectors when there is only one zone of 100V loudspeakers.
4.
Zone1 to Zone5: When there are two or more zones of 70V or 100V loudspeakers in the PA system, you
must use the outputs of the 5 zones (CH1, CH2, CH3, CH4, CH5) and the corresponding COM connectors.
5.
EMC Input Connector: Receives the EMC/alarm signal that will override the other inputs.
6. Mute sensitivity control: Adjust the threshold level to activate the MIC1 priority over the inputs MIC2/
MIC3/AUX1/AUX2.
7. MIC2: XLR connector for a 2nd microphone. With pushbutton to switch on or off the 48V Phantom Power.
8. MIC3: XLR connector for a 2nd microphone. With pushbutton to switch on or off the 48V Phantom Power.
9.
AUX1 input: These two RCA connectors allow “L” & “R” stereo signals from an external audio source,
and converts them internally into mono mode.
10. AUX2 input: These two RCA connectors allow “L” & “R” stereo signals from an external audio source,
and converts them internally into mono mode.
11. Line outputs: They can supply an audio signal to two additional amplifiers at the same time.
12. FM connector: Connect the included FM antenna here.
13.
AC fuse drawer: Contains one main and one spare fuse.
14.
AC power inlet: Connect the included power cord with 3-pin plug.
REMOTE CONTROL
1
2
3
4
5
6
7
8
9
10
11
1. Power (standby)
2.
Mute
3.
4. Previous
5.
Volume -
6.
No function
7. Source selection (USB/BT/FM)
8. EQ selection
9. Next
10. Repeat ONE - Repeat ALL - Random
11.
Number keys to select the song and radio station
4
• APM2826 / APM2836