5
Cable Recommendations
Network Connections
For Gigabit speeds, use Cat 5e or Cat 6 cables for all network connections. Cat 5
cable may be used for networks running at a speed of 10/100Mbps.
Dante Connections
For Gigabit speeds, use Cat 5e or Cat 6 cables for all Dante connections. Cat 5
cable may be used for networks running at a speed of 10/100Mbps.
Connecting To A Contrio Server
After mounting the server properly in the rack and applying power, basic
configuration is needed. Depending on how your network is configured will
determine which method you should use. There are basically three options to
choose from:
1�
Self Addressing (a network without a DHCP server or static IP addresses)
2�
Automatic Addressing (a network with a DHCP server)
3�
Static IP addresses (the IP addresses are assigned manually)
No matter which option you chose, there is a requirement to have Audio
Architect 1.90.1 or higher to configure the device and update to the latest
firmware. If you do not have the software, you may download it from
http://
audioarchitect�harmanpro�com
. If you have problems, the direct connect
method (outlined in
'Self Addressing or Direct Connection' on page 7
)
is the
way to verify the most basic of communications.
Содержание 5047991-B
Страница 1: ...Installation Guide ...
