BSP CG 180, Руководство по эксплуатации, Страница: 15 / 30

4421 1999 REV -

Page 15
SK 7
F 1
F 2
S 1
HIGH
RESTART
RESTART
IMPACT
CABLE
BREAK
CUT-OUT
3.2 Control Panel Layout
The diagram below shows the control panel layout and the connecting leads to the hydraulics, guide
frame and hammer.
Control
F1
S1
F2
12/24v D.C.
O/P to Sensors
System Load Valve
Hammer Control Valve
Stop
Stroke
Dwell
Pump Flow
HAMMER CONTROL
MANUAL LIFT
SK7
Counter
Reset
Test
High Restart
RESTART
Impact
Cable Break
CUT-OUT
Oil Circulate
Device
5 A Fuse
Toggle Switch
0.4 A Fuse
Lamp
Lamp
Lamp
Lamp
Push-button
Potentiometer
Potentiometer
Potentiometer
Rotary Switch
Push-button
7-pole Socket
Display
Push-button
Push-button
Lamp
Lamp
Lamp
Lamp
Lamp
Rotary Switch
Function
Protection on input power supply
Main panel on/off switch
Protection on supply to sensors in hammer
Indicates supply via F1 & S1 is present
Indicates supply to hammer via F2 is present
Indicates SLV (dump valve)is energised
Indicates HCV is energised
Stops power pack engine (& hammer functioning)
Adjusts length of automatic stroke
Adjusts length of pause at impact
Adjust flow from LRB base
HAMMER FUNCTION SELECTOR
Raises Dropweight manually
Alternative connection for monitoring hammer
performance
Blow Totaliser
Zero blow counter
Factory test key
Indicates dropweight sensor operation on hammer
Indicates dropweight sensor operation on hammer
Indicates dropweight sensor operation on hammer
Warning if cable to hammer is broken
Indicates hammer is not engaged on the pile
correctly.
Circulates oil for warming or purging