BSL Impact 6 LED Eye, Руководство пользователя

Страница: 7 / 15

6
3.3 How to do mounting installation.
Step one: Installation the clamp onto the omega bracket;
Step two: Install the clamp and bracket on the bottom of panel, fasten the quick-­‐locks;
Step three: Install the whole device onto appropriate truss and fasten the clamps, tight the safety rope with the truss or
other fixing point at a suitable position that drop down distance not exceed 20 cm.
4. Control menu
4.1 Meaning of the icon in menu
CONNECT LIGHT INFOMATION SET PROGRAM
4.2 Menu tree
Default setting shadowed. Mark with
①
can be basic reloaded,
②
be program reloaded,
③
can be private reloaded.
CO
NNECT
DMX Address
①
XXX DMX address setting
Wireless
①
Wireless Enabled
LI
G
H
T
Max Temperature
① 80
~
139
,
80
/176~282 ,
176
Lamp off if
temperature
continuously over for 5
minutes
Lamp Adjust
①
PAN…… Adjust value of each
channels
IN
FO
RM
AT
IO
N
Time Info. Current XXXX(Hours)
Fixture Life XXXX(Hours) Fixture boot time
Fixture total run time
Temperature Near Lamp Temp (depends on fixture) Temperature Sensors
Fans Speed Near Lamp Fan (depends on fixture) Fan speed Sensors
Channel Value PAN…… Display value of
channel
Error Message Pan,Tilt…… Error channels