BSL Impact 6 LED Eye, Руководство пользователя

Страница: 15 / 15

14
such as remotely changing DMX address, reverse pan/tilt setting, check a lot of useful information such as temperature,
power consumption, fan speed. Etc. Every single device has a unique RDM code before left factory to distinguish from
each other, usually not suggest users change this code freely.
6.2 Software upgrade function via DMX cable, if there is any new firmware for this device come out, it can be upgraded
simply via a software upgrade box, no need to change any mechanical parts. The upgrade box is not included in the
package, if need any further assistance pls just contact authorized dealers.
6.3 Hibernation, the device will enter sleeping mode if activated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as the DMX signal is sent again.
6.4 Display battery, this function is prepaid in the display PCB, users just need to install a normal 10440 600mAh 3.7V
rechargeable lithium battery, then users could power on the display and do setting without connect to main power.
6.5 Display back-­‐up communication IC, there is a back-­‐up communication IC installed in the display PCB, so users could
replace at once if the working one is broken, no need to wait long time from service.
6.6 Display flip, by press up and down button for more than 3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
8. Dimensions Drawing
9. Technical specification
Power supply 100-­‐240 V AC, 50/60 Hz ~
Power consumption 250W
LED LumiEngin COB-­‐2-­‐1600M-­‐W
DMX channels 21/24/14/16 modes
Beam angle 13°
Luminous flux 22460lux@2.5m
Fuse T 3.15 A, 250 V
Device dimensions 343x262x456mm
Net Weight 15KG