27
MULTICARE
IN
device needs two 3V lithium batteries (type CR2032). If the battery icon is blinking, the charge is low
and the batteries must be replaced before taking measurement.
Always insert new batteries and not used ones. Switch off the device before removing the batteries.
Check whether the new batteries are the right ones.
How to replace batteries:
1.
Let the battery housing slide out by pressing on the arrow
printed on the battery compartment.
2.
Remove the batteries from the plastic holder.
3.
Place the new batteries with the negative side facing up.
Insert the cover of battery compartment and close it.
Dispose of used batteries according to local regulations.
1
2
3
If batteries are replaced or simply removed for more than 60 seconds, it is necessary to set
time and date again.
WARNINGS
REPLACING THE BATTERIES
