Repairs
2016-10-28 / DIS 820_58300000190984_ara_en_c
Copyright by BSH Hausgeräte GmbH
Page 17 of 17
6.5
Removing / installing the control module
6.5.1
Removing the control module.
Prerequisite:
•
Appliance has been disconnected from the mains.
•
Appliance has been removed.
•
Rotary knob has been removed (optional, only applies for appliances with
rotary knobs).
1. Place the appliance onto a soft, non-abrasive underlay with the glass ceramic
surface facing downwards.
2. Remove the screws from the hob cover.
3. Remove the hob cover and place to one side.
4. Remove the screws from the control module.
5. Remove the control module.
.
The cables of the control module are not labelled.
It is helpful to mark the cables of the control module before
pulling them out in order to be able to connect the new control
module correctly.
7. Pull out the cables.
6.5.2
Installing the control module
1. Connect the cables.
2. Insert control module.
3. Tighten the control module screws fully.
4. Place the hob cover on top and tighten the screws fully.