BSDracing RAMPAGE XTE BS232R, Инструкция по эксплуатации

Страница: 2 / 11

Required equipment for operation
4.5 4.0
5.5
7.0
17
8
9
12 10
1.5mm
2.0mm
2.5mm
1.Toois required for building and maintenance:
2.Additional items needed for operation:
Hobby knife
Lexan scissors
Cross wrench
Cross wrench
CA glue&rubber cement
Thread locking compound
Flat and Philips screwdriver Wire cutters
Hex wrench
Precision ruler Needle nose pliers
WARNING!
IMPORTANT!
Do not use a power screw driver to install screws into nylon or plastic materials.The fast locking
may heat up the screws being installed that may break the moldedparts or strip thethreads during
in stallation.
4pcs AA alkaline batteries for transmitter
Check all the screws are tight before playing the vehicle!
Use thread lock on all screws that work loose.
AA